Schoeps CCM 2S L, Compact Microphone, Omnidirectional
€1,804.80
per piece
Tax included
The CCM 2S exhibits a slight high-frequency emphasis for frontal sound incidence, with only a slight rolloff of high frequencies off axis and in the reverberant sound field.
Accessories for this and other products can be found in the category "Accessories".
The CCM 2S exhibits a slight high-frequency emphasis for frontal sound incidence, with only a slight rolloff of high frequencies off axis and in the reverberant sound field.
The frequency response characteristic of the CCM 2S falls between that of the CCM 2 and the CCM 2XS, making this microphone suitable for a wide range of applications.
ORDER NUMBER: No. 121011 CCM 2 L (standard Lemo version), incl. SGC, K 5 LU and Premium Case
Features:
· omnidirectional pattern
· slight high-frequency rise to compensate for losses at moderate recording distances
· for a very wide range of recording applications
· often preferred for spaced stereophony and Decca Tree arrangements
PRACTICE
The CCM 2S has proven particularly useful in two- and three-microphone stereo arrays, where its placement near the reverberation radius of the sound field presents a sonically balanced pickup favored by many recording engineers. This model has become our most popular pressure transducer. For spaced microphone (A/B) stereo recording and especially the Decca Tree method, KA 40 accessory spheres are recommended.
TECHNICAL SPECIFICATIONS
Frequency range: see corresponding capsul
Sensitivity: see corresponding capsul
Maximum sound pressure level (THD < 0.5 %): 136 dB-SPL (P48)
128 dB-SPL (P12)
Maximum output voltage: 2,6 V (8,3 dbV) with 2 kΩ load
Low cut filter: 20 Hz, 12 dB/Okt.
Output impedance: 90 Ω @ 1 kHz
Maximum cable length: Z> 400 m
SCHOEPS RFI Shield: No
Powering standard / Valid range: P48 / > 40 V P12 / > 10 V
Current consumption: 4 mA (P48)
3,6 mA (P12)
Common mode rejection ratio (at 1 kHz): > 55 dB
Minimum recommended load impedance: 2 kΩ
Output: Lemo (CCM-L) or XLR-3M (CCM-U),
analog, 1 channel
Surface finish: matte gray
Length: 46 mm (CCM-L)
Diameter: 20 mm
Weight: 33 g (CCM-L)
The CCM 2S exhibits a slight high-frequency emphasis for frontal sound incidence, with only a slight rolloff of high frequencies off axis and in the reverberant sound field.