PMC 8-2 SUB Left Active Subwoofer

€4,386.67
per piece

The PMC 8-2 SUB is a true low-frequency monitor like the PMC8 SUB and offering the same DSP engine and seamless integration with surround and immersive systems, the PMC8-2 SUB betters the spec of its smaller sibling, offering higher maximum SPL output down to 25Hz.


Accessories for this and other products can be found in the category "Accessories".

Quantity
on order, 4-6 weeks delivery time

The PMC 8-2 SUB is a true low-frequency monitor like the PMC8 SUB and offering the same DSP engine and seamless integration with surround and immersive systems, the PMC8-2 SUB betters the spec of its smaller sibling, offering higher maximum SPL output down to 25Hz.

With the same dimensions as the PMC8-2 midfield monitor, the PMC8-2 SUB’s twin eight-inch bass drivers are powered by independent 400W Class-D amplifiers. The same configuration options are available as on the PMC8 SUB, likewise accessible on the speaker’s rear panel or by using the browser-based SoundAlign™ software via a LAN-connected tablet, smartphone or computer.

The PMC8-2 SUB can be used as a standalone subwoofer for multichannel and immersive sound systems, or as an XBD cabinet with either PMC6-2 or PMC8-2 s, creating a system of awesome power and dynamic range. The sub is available in either left- or right-handed cabinet versions (PMC8-2 SUB-L or PMC8-2 SUB-R), to allow placement of the bass drivers on the outside edges of a stereo array, matching the arrangement of the main monitors.

Specifications:

·         Type:  Active subwoofer with ATL™ bass loading

·         Drive Unit Complement:   LF 2xPMC 200mm studio 8 driver

·         Effective ATL™ Length:  2x3m

·         Frequency Response:  25Hz - 500Hz (- 3dB) (@1m full space, on-axis)

·         Sensitivity:  +4dBu input signal = 98dB SPL @ 1m

·         Max continuous SPL:  115dB @1m (Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

·         Max Peak SPL:  127dB @1m(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

·         Analogue input:   +20/+24dBu max. input level (selectable)- 22K ohm input impedance

·         Digital input:  - 16/24-bit AES3 signal, left, right or left + right- 18 - 192kHz Sample Rate- 110 ohm input impedance

·         Expansion card slot:  For future connectivity upgrades

·         Output:  XLR digital AES3 (fixed 24-bit @ 96kHz)

·         Network:  RJ45 for use with PMC SoundAlign web interface

Features:

·         Level Trim (+/-10dB)

·         Low-pass filter (20 - 200Hz, 12dB/Oct)

·         Delay (0 - 30mS)

·         Phase (normal or inverted)

·         LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)

·         Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB)User presets (3 + factory defaults)

·         Amplifier power per channel: 2x400Wrms

·         Power consumption (idle)50W, Power consumption (max)800W

Dimensions / Weight:

·         534mm H x 551mm W x 440mm D

·         39 kg