PMC 6-2 Active Studio Speakers
€11,299.00
per pair
Tax included
The PMC6-2 provides main-monitor scale, depth, and dynamics, and allows mix decisions to be made quickly, with absolute certainty and without fatigue.
Accessories for this and other products can be found in the category "Accessories".
The PMC6-2 provides main-monitor scale, depth, and dynamics, and allows mix decisions to be made quickly, with absolute certainty and without fatigue.
This 3-way active monitor speaker combines two custom 6-inch ultra-long-throw bass-drivers with our radically engineered PMC55 2-inch soft-dome mid-range unit and a precision-built one-inch soft-dome tweeter. The PMC55’s distinctive ‘N-compass’ waveguide enhances the wide dispersion and remarkable mid-range projection of the driver; in combination with the high performance of the tweeter, the result is an ultra-wide and stable image, with a smooth and natural in-room response. Each bass driver is individually powered by a cutting-edge 400W Class-D amplifier and seamlessly integrated by our sophisticated, highly accurate DSP-based crossovers. As with the PMC6, the monitor is configured using rear-panel controls or the browser-based SoundAlign™ software, with comprehensive boundary and EQ options.
The PMC6-2 offers astonishing size-to-performance ratio thanks to its ATL™ bass-loading technology, which results in exceptional LF extension and consistent tonal balance at all listening levels. Our Laminair™ airflow technology, visible in the monitor’s hexagonal vent ducts, further reduces colouration and enhances dynamics and efficiency.
A simple upgrade path converts the PMC6-2 to a full-range XBD system; just add a PMC8.2 SUB and select XBD mode to perfectly dovetail the two units, extending the response down to 25Hz with additional headroom.
Specifications:
· Type: Active 3-way nearfield reference monitor with ATL™ bass loading
· Drive Unit Complement:
LF 2xPMC 150mm (6”) studio 6 driver
HF PMC 27mm (1”) soft dome tweeter
MF PMC 55mm (2”) soft dome mid-range
· Effective ATL™ Length: 2m (5.9ft)
· Frequency Response: 33Hz - 25kHz (- 3dB) (@1m full space, on-axis)
· Sensitivity: +4dBu input signal = 98dB SPL @ 1m
· Max continuous SPL: 109dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
· Max Peak SPL: 121dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
· Directivity: H +/-60 degreesV +50/-40 degrees (-6dB off axis @10kHz)
· Analogue input: +20/+24dBu max. input level (selectable)- 22K ohm input impedance
· Digital input: 16/24-bit AES3 signal, left, right or left + right- 18 - 192kHz sample rate- 110 ohm input impedance
· Expansion card slot: For future connectivity upgrades
· Output: XLR digital AES3 (fixed 24-bit @ 96kHz)
· Network: RJ45 for use with PMC SoundAlign web interface
Features:
· Level Trim (+/-10dB)
· High-pass filter (20 - 200Hz, 12dB/Oct)
· Delay (0 - 30mS)
· Phase (normal or inverted)
· LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)
· Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB)User presets (3 + factory defaults)
· Amplifier power per channel:
LF 2 x 400Wrms
HF 1 x 400Wrms
MF 1 x 400Wrms
· Power consumption (idle)50W, Power consumption (max)1500W
Dimensions / Weight:
· 400mm H x 430mm W x 372mm D
· 21.3 kg (each)
The PMC6-2 provides main-monitor scale, depth, and dynamics, and allows mix decisions to be made quickly, with absolute certainty and without fatigue.